M8x30 SHCS For 90° Miter Connection
Part. N° 21.1206
APPLICATIONS |
- Economical way to make 90° miter joints. This is especially useful for doors that need to seal. The miter connection allows for an uninterrupted t-slot to install the Sealing Profile, Part # 22.1011 into |
Item 1) Miter cut 45 degrees & Mill an 8.5mm flat centered on existing hole. Then form tap M8x1.25, 1" deep |
Item 2) Miter cut 45 degrees & c'bore Ø15mm hole, 15.3mm deep. Drill 7.9mm thru. (note a very tight tolerance thru hole is important to stop the joint from sliding while the screw is tightened) |
TECHN. DATA / ITEMS SUPPLIED |
- Steel, zinc plated |
- Diameter |
8 mm |
- Length |
30 mm |
- Thread pitch |
1.25 mm |
- Hex drive |
5 mm |
ASSEMBLY |
-Insert the M8x30 screw thru the counter bored hole & tighten into the tapped hole on the opposing profile |
- Insert screw thru clearance hole in part |
- Tighten screw using 5mm hex key |